Error Code PO411

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

Error Code PO411

Printable Version

Volkswagen Forum >> VW MODELS >> Volkswagen Jetta >> Error Code PO411

Page: [1]

Message

<< Older Topic Newer Topic >>

Error Code PO411 - 10/29/2007 4:54:26 AM

orionje

Posts: 1
Joined: 10/29/2007
Status: offline

Hi
I'm new to this forum, I see there are alot of smart people here. My qyestion is that I have a 2001 VW Jetta VR6 The check engine light has come on had It scanned and the code was PO411 (Secondary Air Injection System Incorrect Flow) on the DTC Pending (Codes)said ( No Faults Detected) the problem is when I clear it ,it goes for a week or so and comes back on.. In my State New hampshire if you have a Check Engine Light on during Inspection they fail you if I erase code error before I go in will they detect anything through there Equipment I would really like to
fix the propblem if any
Thanks for any Help
Steve

Post #: 1

RE: Error Code PO411 - 10/29/2007 9:26:18 PM

emagdnim

Posts: 134
Joined: 7/24/2006
Status: offline

if you clear the code and you have it inspected before the light comes back on then they won't be able to detect it.

not sure what it is, MAF sensor, possible vacuum hose leak, not sure

(in reply to orionje)

Post #: 2

RE: Error Code PO411 - 4/28/2008 5:21:24 PM

Kyo_clone

Posts: 21
Joined: 4/28/2008
Status: offline

its the secondary air injector.... had same problem.... My secondary air injection was unstuck..... or it could be one of ur hose getting clamped by something.......if u earse it and doesnt come back then ur fine if not u better fix it....

_____________________________

98 VW Jetta Vr6 Custom cold air intake

(in reply to emagdnim)

Post #: 3

RE: Error Code PO411 - 4/28/2008 5:34:17 PM

Jrailer

Posts: 564
Joined: 12/8/2007
Status: offline

probably a vacume line off of the deverter valve
and it will not pass a test if you clear it before you take it in
it needs to go through a drive cycle before it gets ready status
thats why it takes a few days to retriger the light

(in reply to Kyo_clone)

Post #: 4