looking for advice

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

looking for advice

Printable Version

Volkswagen Forums >> VW MODELS >> Volkswagen Jetta >> looking for advice

Page: [1]

Message

<< Older Topic Newer Topic >>

looking for advice - 11/22/2007 7:07:01 AM

vwnovice

Posts: 1
Joined: 11/22/2007
Status: offline

I've had a 94 jetta for a while and I don't work on it myself Recently, it started to drip oil. A good VW independant shop said it was the head gasket and it is scheduled for next week. The car has a lot of miles (about 175,000). I don't want to spend a lot of money on it but it is my only way of getting to work everyday which is a 50 mile round trip. I haven't had a lot of maintenence on it since I got it a year and a half ago other than brakes and minor things. I park it in my dad's driveway and he doesn't want to see any oil drips.

I have never done the timing belt and don't know when it was done previously. Is there any danger of it breaking and damaging the engine?

Is there else I should have done at the same time they are doing the head gasket that would help make this car last longer?

< Message edited by vwnovice -- 11/22/2007 7:08:23 AM >

Post #: 1

RE: looking for advice - 11/22/2007 8:38:31 AM

sigigigi

Posts: 2
Joined: 11/21/2007
Status: offline

Well first of all you said you didn’t want to spend much money but changing the head gasket is going to probably cost you a pretty penny... It consists of removing the engine head from the block and then scraping off the old gasket to put a new one. In this process they will also have to remove the timing belt so therefore I would get it replaced since there at it. It would cost you a lot less then changing it some other time. On top of that if it was never changed it could break then you could potentially scrap your motor because your pistons could hit the valves and screw up everything….

Good luck !!!

(in reply to vwnovice)

Post #: 2