VW Hi Performance

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

VW Hi Performance

Printable Version

Volkswagen Forum >> VW MODELS >> Volkswagen Beetle >> VW Hi Performance

Page: [1]

Message

<< Older Topic Newer Topic >>

VW Hi Performance - 1/26/2006 5:21:09 PM

ellie56

Posts: 20
Joined: 12/28/2005
Status: offline

I have been into VW Type one for the past 40 years and I have to plead ignorance in this instance. Is there any way to run dual Port heads on a 40 horse Engine without the expense of the Okrasa head designed for this purpose. Any one who knows the Okrasa brand will vouch for its outragous price since production ceased. I am going to run 83 mm big bore barrels. Stock 1600 barrels are 85.5 mm a difference of 2.5 mm. Will the dual port heads seal or will I have to weld and remachine. I also realize the stud difference for the upper center studs will be shortened to accomodate the highth of the head. Perhaps I am dating my self here and have missed the train. Let me know as it is interesting to me to do something I am told can not be done.

Post #: 1

RE: VW Hi Performance - 1/30/2006 2:43:28 PM

61bahabug

Posts: 5
Joined: 1/29/2006
Status: offline

Hi, my 1st post. i hope it helps. I would take a head gasket for a 1600 an put it on the 40 jug to see if it might seal. differnt size studs shouldn't be a problem. i also like to do what can't be done. must be an AGE thing. HA, HA hope this helps. John

_____________________________

baha, the most fun you can have with your cloths on.

(in reply to ellie56)

Post #: 2