going to rebuild 1600cc

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

going to rebuild 1600cc

Printable Version

Volkswagen >> VW MODELS >> Volkswagen Beetle >> going to rebuild 1600cc

Page: [1]

Message

<< Older Topic Newer Topic >>

going to rebuild 1600cc - 3/28/2008 1:04:26 PM

little_scottie

Posts: 1
Joined: 3/28/2008
Status: offline

My brother and I are going to rebuild his 1969 1600cc motor. My brother has bought a kit from JC witney.
We plan to disassemble the motor and use the kit to rebuild it.
Does anyone have any advice for us?
My only question is with the new main and rod bearings, what is the best way to check clearance? plastic gage?

Any tricks we might need to know?

thanks
little_scottie

Post #: 1

RE: going to rebuild 1600cc - 3/31/2008 4:30:42 PM

knightrs32

Posts: 42
Joined: 3/20/2008
Status: offline

Find a reputable VW mechanic. Not a mechanic, an air-cooled VW mechanic. When you split the crankcase open you have to get it "align bored". Basically they machine all the surfaces down again which is why I buy the parts after boring and having it spec'd so that everything fits just right. Another reason for the align bore is because the case has no gasket so the surfaces have to mate up perfectly.

Another suggestion is to go "all stock" or "all pro". Either make it stock or completely high performance...you'll have a lot less problems this way.

_____________________________

Harley A. Cardwell
1976 Sunroof Beetle
1971 Baja Beetle

(in reply to little_scottie)

Post #: 2