99 beetle stalls when pressing on brake pedal

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

99 beetle stalls when pressing on brake pedal

Printable Version

Volkswagen Forum >> VW MODELS >> Volkswagen Beetle >> 99 beetle stalls when pressing on brake pedal

Page: [1]

Message

<< Older Topic Newer Topic >>

99 beetle stalls when pressing on brake pedal - 4/26/2008 8:50:47 PM

DonM77

Posts: 4
Joined: 4/26/2008
Status: offline

Installed new pads and rotors today. After I was done and went for a test drive the engine stalls ever time I press on the brake pedal. I was unable to bleed the left rear because the valve had been rounded off from whoever last bleed the brakes! Because of this I had very little brake pressure, I believe?

What could be going on here?

Post #: 1

RE: 99 beetle stalls when pressing on brake pedal - 4/27/2008 10:26:33 AM

bagel

Posts: 1024
Joined: 8/16/2005
Status: offline

just get vise grips and remove that valve and get another one. As far as stalling, have you tried double-footing when you are slowing down or stopping? Does it die as soon as you hit the brakes? Could be coincidental, but check your MAF

_____________________________

'00 Jetta VR6 GLS 12V 2.8L
Magnaflow Exhaust
Custom Cold Air Intake
Eurosport Underdrive Pulley
GIAC Chip
Diamond Mesh Grill--Front
Smoked Euro Tail Lights
18" ADR Rims On Toyo Proxes
Pioneer Deck, 2400W Rockford AMP, 2-12" Alpine Type

(in reply to DonM77)

Post #: 2

RE: 99 beetle stalls when pressing on brake pedal - 4/27/2008 11:09:47 AM

DonM77

Posts: 4
Joined: 4/26/2008
Status: offline

Thanks for the reply I actually just came in and found the problem. The problem was that there was to much air in the lines and very little brake fluid. I'm guess the brake booster was working double time, which is what was causing the engine to stall. Basicly a pressure problem.

The fix was to remove the bad valve and gave it a good bleeding.

Thanks again!

(in reply to bagel)

Post #: 3