RADIO HELP! PLEASE!

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

RADIO HELP! PLEASE!

Printable Version

Volkswagen Forums >> SHOW TIME >> Audio/Visual Electronics >> RADIO HELP! PLEASE!

Page: [1]

Message

<< Older Topic Newer Topic >>

RADIO HELP! PLEASE! - 6/20/2008 10:56:30 AM

Lady_Shinoda

Posts: 1
Joined: 6/20/2008
Status: offline

hi guys maybe someone here can help me! i hope soo!
ok heres whats going on i have a 1998 Volkswagen Beetle & i have the factory radio on it and its asking me for the code, i have all of that.
Ive read on here the steps on how to do it! But i dont understand after i put in the code...
I hold down the foward seek button and it beeps and it gets the signal then it goes off and says "safe 1"

I dont get what else to do!
I guess im going to have to go to the dealer.. ):
am i missing any steps or anything?!
i dont know ): i hope someone can help me out please let me know anyone! please!! thanks!! guys!

Post #: 1

RE: RADIO HELP! PLEASE! - 6/20/2008 6:59:36 PM

robert492

Posts: 16
Joined: 8/17/2007
Status: offline

here''s how i did it:

1. "SAFE" apperars on the display.
2. Press & hold "MODE" button.
3. Press & hold "SCAN" button.
4. "1000" appears on the display.
5. Release both buttons immediately.
6. There should be a number to the left of the "1000" This should represent how many times you have tried to enter the code.
7. Enter your 3 or 4 digit code with the following. If you have a 3 digit code, assume that the first digit is a zero or blank.
8. Press button 1 until your first digit is changed to the correct number. (zero or blank)
9. Press button 2 until your 2nd digit is correct.
10. Do the same with the 3rd and 4th digit.
11. When the digits are correct, press & hold the "MODE" button.
12. Press & hold the "SCAN" }button.
13. The word "SAFE" should show up again.
14. Release the buttons immediately and your radio should work

(in reply to Lady_Shinoda)

Post #: 2