Won't start; Zero compression

Volkswagen Forum VW Classifieds Photo Gallery Search Contact VWF
News Forum FAQ Sponsors Calendars Member List VW Recalls TSBs Timeslips Register Login

Won't start; Zero compression

Printable Version

Volkswagen Forum >> VW MODELS >> Volkswagen GTi / TDi >> Won't start; Zero compression

Page: [1]

Message

<< Older Topic Newer Topic >>

Won't start; Zero compression - 10/6/2007 8:48:32 PM

Doug

Posts: 1
Joined: 10/6/2007
Status: offline

Hi, I have a 97 GTI with a 2.0 SOHC. I had replaced the timing belt 6 months ago. It has been running great until today. It quit and won't start. I have spark, and fuel, but zero compression on all 4 cyl. I verified the timing belt was intact and the CAM gear marking and the flywheel marking are dead on as the day I installed it.

I am puzzled by zero compression on all 4. I took the vlave cover off, and all the lifters are operating. I assume I have bent valves or the head cracked. The car did not over heat and has the proper amount of coolant. The engine has 140k on it. I assume I'd be money ahead finding a low mileage used rather than the reapairing the head.

Any ideas on the zero compression?

Thanks

Doug